Retrofitting

Retrofitting if LED Remote or Purion 200 is on the bike

Is there an LED Remote or Purion 200 installed on your eBike? With the right cables, the right display mount (Display Mount Kit) and a little installation skill, you can use the Kiox 500, Kiox 300 or SmartphoneGrip displays.

You can get hold of the right accessories through our  Bosch eBike webshop.

What to do:

• Select the correct handlebar diameter and order the corresponding Display Mount Kit.
• Order an additional display cable of the appropriate length. You can easily measure this yourself: from the posterior position of the display interface to the LED Remote or Purion 200  Bosch eBike webshop
• You can find out how to mount the display mount on the handlebar in the operating instructions.
• Unplug the existing cable from the LED Remote or your Purion 200. Now plug one end of the new, short display cable into the vacated socket. Insert the other end into the display interface. It doesn't matter which socket you choose.
• Now plug the free end of the cable into the second socket of the display interface.

You can now place your Kiox 500, Kiox 300 or SmartphoneGrip onto the display interface.

Note: In the shop, we only offer the variant where the display can be mounted in front of the handlebar – the cables are plugged into the underside of the mount, so they run towards the rider. If you prefer to place the display in the handlebar triangle or above the stem instead, you will need a different Display Mount Kit that routes the cables to the front. This variant is available from  Bosch eBike dealers.

Retrofitting if only the System Controller and Mini Remote are currently on the bike

Is there a System Controller with Mini Remote installed on your eBike? With the right cables, the right display mount (Display Mount Kit) and a little installation skill, you can use the Kiox 500, Kiox 300 or SmartphoneGrip displays.
Alternatively, you can of course order the retrofit from your specialist bike dealer.

You can get hold of the right accessories through our  Bosch eBike webshop.

What to do:

• Select the correct handlebar diameter and order the corresponding Display Mount Kit.
• Order an additional display cable of the appropriate length. You can easily measure this yourself: from the posterior position of the display mount to the System Controller.  Bosch eBike webshop
• Check whether the existing cable of the System Controller is long enough to reach the posterior position of the display mount. If not, you can obtain an appropriate cable from a Bosch eBike dealer.
• Mount the display mount on the handlebar by referring to the operating instructions.
• Loosen the screw of the System Controller and pull it out of the top tube. Unplug the existing cable from the System Controller, feed it through the frame and plug it into one of the two sockets on the display mount.
• Plug the additional display cable into the second socket of the display mount and route it to the System Controller.
• Insert it there as well and secure the System Controller again with the screw. You can now place your Kiox 500, Kiox 300, or SmartphoneGrip onto the display interface.

Tip: Alternatively, you can ask your Bosch eBike dealer to install a Y-cable for you.

• Guide the free Y-arm of the cable out of the frame and insert it into the display mount.
• Close the second socket of the display mount with a dummy plug (not part of the Display Mount Kit).

Note 1: To be able to use the functions of the displays, you need a Mini Remote or Mini Remote Dropbar, depending on the handlebar. You can simply connect it via Bluetooth.

Note 2: In the shop, we only offer the variant where the display can be mounted in front of the handlebar – the cables are plugged into the underside of the mount, so they run towards the rider. If you prefer to place the display in the handlebar triangle or above the stem instead, you will need a different Display Mount Kit that routes the cables to the front. This variant is available from  Bosch eBike dealers.